This two-day program was designed, and is taught, by senior electrical professionals, each with over 40 years experience on electrical systems from 2300V to 500kV. It is taught regularly to substation electricians responsible for medium voltage systems to 25kV and to utility personnel responsible for 69kV to 500kV systems.
It combines in-depth exploration of the Workplace Electrical Safety standard, CSA Z462-24 and practical workshops assessing and mitigating hazards for anyone working on or near high voltage systems. For Saskatchewan participants it exceeds the requirements for Qualified Electrical Workers. Since 1981, several thousand international participants have learned to recognize HV hazards created by electrical systems, equipment and devices and determined the controls used to protect themselves from these hazards.
This program is taught by certified electrical professionals with decades of field experience and solid credentials as professional adult learning instructors and includes professionally designed slides, videos and extensive use of case studies. It examines the electrical hazards found in industry and stresses the importance of the individual employee proactively recognizing hazards and applying safe work practices with the goal of zero incidents.
Who should attend: Substation Electricians, Engineers, Commercial and Industrial Electricians, Instrumentation Mechanics, Technicians, Managers & Safety Professionals.
You will be able to: Safely operate and maintain High Voltage systems. Work confidently using established safety procedures. Organize HV workers under your lead. Communicate fluently regarding your High Voltage systems. Avoid accidents and injuries. Comply with provincial/state and federal legislative requirements.
Next Arc Flash & High Voltage Safety - Qualified Electrical Worker Certification Courses | ||||
---|---|---|---|---|
April 29 – 30, 2024 | LIVE 2-Way Video Training 8am-4pm Edmonton Time | OR24337 | $1379.00 + Tax Per Attendee | Register |
May 2 – 3, 2024 | LIVE 2-Way Video Training 8am-4pm Toronto time | OR24340 | $1379.00 + Tax Per Attendee | Register |
May 6 – 7, 2024 | LIVE 2-Way Video Training 8am-4pm Charlottetown time | OR24342 | $1379.00 + Tax Per Attendee | Register |
May 9 – 10, 2024 | LIVE 2-Way Video Training 8am-4pm St. John's NL time | OR24344 | $1379.00 + Tax Per Attendee | Register |
May 13 – 14, 2024 | LIVE 2-Way Video Training 8am-4pm Vancouver time | OR24346 | $1379.00 + Tax Per Attendee | Register |
May 15 – 16, 2024 | LIVE 2-Way Video Training 8am-4pm Edmonton Time | OR24348 | $1379.00 + Tax Per Attendee | Register |
May 21 – 22, 2024 | LIVE 2-Way Video Training 8am-4pm Saskatoon time | OR24350 | $1379.00 + Tax Per Attendee | Register |
May 23 – 24, 2024 | LIVE 2-Way Video Training 8am-4pm Winnipeg time | OR24352 | $1379.00 + Tax Per Attendee | Register |
May 27 – 28, 2024 | Halifax, NS | OR24124 | $1379.00 + Tax Per Attendee | Register |
May 27 – 28, 2024 | LIVE 2-Way Video Training 8am-4pm Toronto time | OR24354 | $1379.00 + Tax Per Attendee | Register |
View schedule |
Objective: Realize the damage electricity can cause to the human body and understand the basic principles of safety in normal and abnormal conditions.
Objective: Understand how to relate and apply the Arc Flash mitigation guidelines as set out by the Canadian Standards Association.
Objective: Learn to recognise all energy sources and hazards created by various electrical equipment and devices.
View all topicsObjective: Realize the damage electricity can cause to the human body and understand the basic principles of safety in normal and abnormal conditions.
Objective: Understand how to relate and apply the Arc Flash mitigation guidelines as set out by the Canadian Standards Association.
Objective: Learn to recognise all energy sources and hazards created by various electrical equipment and devices.
Objective: Understand legislation and apply methodologies to comply.
Objective: Establish an accessible and usable system of practice that will protect both life and liability.
Objective: Gain a comprehensive knowledge of the required PPE and ancillary High Voltage safety equipment available.
Objective: Understand and apply preventative and post accident meetings, analyses and reports.
Objective: Learn and apply safe practical skills.
Objective: Learn the dangers of and how induced currents and ground gradients are produced and how to safely select, install and maintain temporary grounds for protection of the worker.
Objective: Interpret and use a single line diagram to write a switching sequence to safely isolate an electrical device for work. Validate existing operating orders and switching procedures. Develop and maintain mandated documentation for all electrical equipment isolation and maintenance work.
Objective: Carry out Hazard/Risk Analysis in determining the degree and extent of hazards for maintenance tasks on all electrical equipment.
Date | City & prov | Venue | Code | |
April 29 – 30, 2024 | LIVE 2-Way Video MST/GMT-6 | Teleconference | OR24337 | Register |
May 2 – 3, 2024 | LIVE 2-Way Video EST/GMT-4 | Teleconference | OR24340 | Register |
May 6 – 7, 2024 | Teleconference | OR24342 | Register | |
May 9 – 10, 2024 | Teleconference | OR24344 | Register | |
May 13 – 14, 2024 | LIVE 2-Way Video PST/GMT-7 | Teleconference | OR24346 | Register |
May 15 – 16, 2024 | LIVE 2-Way Video MST/GMT-6 | Teleconference | OR24348 | Register |
May 21 – 22, 2024 | LIVE 2-Way Video MST/GMT-6 | Teleconference | OR24350 | Register |
May 23 – 24, 2024 | LIVE 2-Way Video CST/GMT-5 | Teleconference | OR24352 | Register |
May 27 – 28, 2024 | Halifax , NS | Quality Inn Halifax Airport | OR24124 | Register |
May 27 – 28, 2024 | LIVE 2-Way Video EST/GMT-4 | Teleconference | OR24354 | Register |
May 28 – 29, 2024 | Brandon , MB | Victoria Inn | OR24114 | Register |
May 28 – 29, 2024 | Fort St. John , BC | Northern Grand | OR24118 | Register |
May 28 – 29, 2024 | Barrie , ON | Hampton Inn & Suites by Hilton Barrie | OR24122 | Register |
May 30 – 31, 2024 | LIVE 2-Way Video AST/GMT-3 | Teleconference | OR24356 | Register |
June 3 – 4, 2024 | LIVE 2-Way Video MST/GMT-6 | Teleconference | OR24375 | Register |
June 6 – 7, 2024 | LIVE 2-Way Video PST/GMT-7 | Teleconference | OR24377 | Register |
June 10 – 11, 2024 | LIVE 2-Way Video MST/GMT-6 | Teleconference | OR24379 | Register |
June 13 – 14, 2024 | LIVE 2-Way Video CST/GMT-5 | Teleconference | OR24381 | Register |
June 17 – 18, 2024 | LIVE 2-Way Video EST/GMT-4 | Teleconference | OR24383 | Register |
June 19 – 20, 2024 | Sherwood Park , AB | Hampton Inn & Suites Sherwood Park | OR24108 | Register |
June 19 – 20, 2024 | Swift Current , SK | Home Inn & Suites | OR24112 | Register |
June 19 – 20, 2024 | Teleconference | OR24385 | Register | |
June 20 – 21, 2024 | LIVE 2-Way Video AST/GMT-3 | Teleconference | OR24387 | Register |
June 24 – 25, 2024 | LIVE 2-Way Video AST/GMT-3 | Teleconference | OR24389 | Register |
June 26 – 27, 2024 | Saskatoon , SK | Saskatoon Ramada Hotel | OR24120 | Register |
June 26 – 27, 2024 | LIVE 2-Way Video MST/GMT-6 | Teleconference | OR24391 | Register |
July 3 – 4, 2024 | Swift Current , SK | Home Inn & Suites | OR24451 | Register |
July 3 – 4, 2024 | LIVE 2-Way Video EST/GMT-4 | Teleconference | OR24455 | Register |
July 9 – 10, 2024 | LIVE 2-Way Video CST/GMT-5 | Teleconference | OR24457 | Register |
July 10 – 11, 2024 | Edmonton , AB | Hampton Inn Edmonton/Sherwood Park | OR24450 | Register |
July 15 – 16, 2024 | LIVE 2-Way Video MST/GMT-6 | Teleconference | OR24459 | Register |
July 17 – 18, 2024 | Barrie , ON | Holiday Inn Barrie Hotel and Conference Centre | OR24453 | Register |
July 17 – 18, 2024 | LIVE 2-Way Video AST/GMT-3 | Teleconference | OR24464 | Register |
July 18 – 19, 2024 | LIVE 2-Way Video PST/GMT-7 | Teleconference | OR24462 | Register |
August 20 – 21, 2024 | Brandon , MB | Victoria Inn | OR24116 | Register |
Daniel Chartier travaille comme ingénieur électrique depuis près de 30 ans, et est spécialisé en automatisation et contrôles. Il a travaillé dans des fonderies d'aluminium et les mines, dans l'emballage, les stations de pompage et dans la construction d'usines thermiques (District Cooling) au cours des ans. Il a été responsable du développement de formations de sécurité dans...
Doug brings over forty five years experience in the electrical industry, working for utility, utility contractors, engineering firm, and educational institute. Most recently finishing a career at NAIT as an instructor/academic chair (Northern Alberta Institute of Technology) in Power Lineman, Power System Electrician, Electrician and Electrical Engineering Technology programs. He has constructed and...
44 years as an Industrial Maintenance Electrician in the U.K. And CanadaExperience in the engineering and manufacturing industries maintaining a wide variety of electrical equipmentWorked primarily in the Potash mining industry in Saskatchewan (32 years) At Potash held various roles, worked underground maintaining Electrical systems and equipment.Mill maintenance Electrician working on high, medium...
He began his career in the electrical trade by engaging in construction activities at a potash mine located west of Saskatoon, Saskatchewan. Since then, he has accumulated experience in various facets of the electrical trade, including construction, commissioning, and maintenance.Norm has contributed his skills to the commercial, industrial, and mining sectors. Additionally, he successfully managed...
Wayne joined Canada Training Group with over 40 years of knowledge and experience in the Electrical and Instrumentation industry. As a Master Electrician and Journeyman Instrument Mechanic, Wayne offers a unique perspective to training that provides solid theory with practical applications gained through years of work in the industry. Wayne’s oilfield and agriculture experience encompasses maintenance...
Dave began his career in commercial high rises in Calgary. He then spent time working industrial oilfield maintenance electrical in Alberta followed by General Motors in Oshawa Ontario, Koch fertilizer and Husky Oil in Manitoba, Baffin Island at an iron ore mine and commissioning in the Alberta oildsands sector.Dave is also an avid whitewater rafting professional, and has served as a guide in Ontario...
Richard Stickel worked at the Canfor Taylor Pulp Mill for 33 years. He has worked in operations, electrical and industrial instrumentation maintenance, construction in the oil and gas field and airport electrical construction. He holds dual journeyman certification as an electrician as well as an instrument mechanic. He is a 4th class power engineer.As a technician Richard was involved with construction...
Peter Waugh brings 44 years of experience in fields of maintenance and human resources management. Peter graduated in Electrical Engineering from the University of New Brunswick. He started his career with Westinghouse Industrial Field Service servicing power distribution equipment. He then moved to the Pulp & Paper industry where he worked for three companies over the next 30 years working in...
Ed Rideout has been involved with the electrical field in many ways for nearly 54 years. His electrical experience started when he was just out of vocational school and was hired as the sole electrician at a local fish plant in charge of six fishing trawlers, a power house and a fish plant facility. In 1975 Ed went on to work with Nova Scotia Power, first as an apprentice electrician in a generating...
With 33 years of on the job experience at Hydro One, doing consulting work for McGregor Allsop, Trow Engineering Consultants and Dillion and Associates, Dave has acquired extensive knowledge of electrical equipment, installations and legislative requirements. While with Hydro One, Dave was involved with many projects including: - Held the lead role in the implementation of the new Training Development...
Jim Roberts brings over 43 years of experience in the electrical field. A graduate from the Georgian College Electrical Engineering program, he started his career at Toronto Hydro Electrical Systems as a High Voltage Underground Cable Fault Technician then proceeded to Toronto Transit Commission where he obtained his red seal 309A electrical license and became a Maintenance/Construction Electrician...
It was a well-put-together course. Good for understanding all of the safety aspects working with or around high voltage.
Nick O'Leary, Cummins“This course was very informative and “real”. The instructor made the information feel relative and his life experiences made an impression that will make you think about the consequences of your actions when working within the electrical field. It was impressed that “short cuts” are not an...
D Stachiw, Kimberly Clark“Very informative course, to the point with lots of use of everyday situations as examples.”
Stephen Arnold, Black and McDonaldThis online course was real easy to follow and to understand. Overall a great refresher.
Wayne Jaques, Enbridge“I would highly recommend this course to my co-workers. It offers a lot of helpful information regarding many hazards involved with high voltage installations and maintenance.”
Chris Skinner, Syncrude Canada Ltd.“Excellent instructor and he is very knowledgeable of the subject matter. 3 years ago we were forced to use a common trainer and Canada Training Group is far superior.”Good course.”
Jan Nijman, Enbridge Pipelines"Lots of material, well written and was communicated with clarity."
Maxine Firmston, TransAlta"This is by far the most informative and most organized course I have taken yet. I highly recommend this course to all electricians. It was very nice to have a highly experienced and knowledgeable instructor, Terry Yonkheym to present this course."
Wayne Robinson, PTI Maintenance“Course was well taught. Very valuable as a reminder for shock hazards and safety.”
Kevin Thomas, Department of National Defence, RPOPS Division, Pacific Division"The course was very interesting and informative in regards to how dangerous an arc flash can be. Dave Neal shared many personal stories and experiences. The course made us aware of the proper protective gear that an electrician requires to be safe in an Arc Flash situation. Very good course and instructor."
Mike Wilgosh, SMS Equipment“This course was very interesting and entertaining. Good coverage of material. Useful information for real work situations, we will all encounter at some time.”
Kyle Anderson, Pyramid“Very good course. I learnt a lot on safety and to be more aware of high voltage. Very happy I came to the course, very knowledgeable and answered all questions.”
Shane Higgins, Black & McDonald Limited“The material and topics are relevant to situations in the work place. It gave lots to consider and things can be used in real life situations.”
Chis Thomsen, Pembina Pipeline“This course provided a refresher to some topics as well introduced some new topics I wasn’t aware of. Excellent visuals accompanied with course material. I would recommend this course to others.”
Michael Wilgosh, ESSO Imperial Oil“Very informative course, highly knowledgeable instructor that kept the information interesting and instilled a respect for the hazards involved.”
Paul Doering, Kruger Products LP"This course was very informative. Also a good review of certain aspects. The instructor was very knowledgeable about the course and excellent interaction with the class."
Gordon Yetman, Kiewit Energy Corp.“Great instructor; kept it alive. Good material, with lots of examples, pictures, and past experience. Overall, good to be part of the program.”
Chris W, EssoThe instructor was very knowledgeable and presented information in a way that was easily understood. The course content was good for a basic understanding of Arc Flash. I can see us using this course for informing some of our non-electrical people.
Mark Bachman, Canadian Light Source"Great course, limited the long drawn out readings, engaging activities, informative videos. The instructor has a great deal of personal experience."
Simon Szczesniak, Ace Instruments Ltd.The course was an excellent reminder to use PPE and look after my Arc Flash Clothing and an excellent reminder of electrical safety.
Tania Woodbeak, DND ComoxRoss Dion, the instructor, kept the material interesting with plenty of real world scenarios. Despite the fact I have decades of trade experience; I learned new things in this course beneficial to increased safety and my personal comfort zone. Definitely could save some lives!!
Todd Annett, PTI Camp Installations“Pleasant and knowledgeable. Excellent in answering questions. Always stresses the importance of safety.”
Glen Greaney, Syncrude Canada“Informative, very good instructor, knowledgeable. Would recommend for anyone dealing with electricity in the work place.”
Gary Grove, Westmoreland Coal“Well versed with the subject matter. Every subject is well explained, and elaborated. Willing to accept questions and explanations were simple and understandable.”
Rogelio Caldoza, Littlefuse Startco"This course is very informative about the arc flash capabilities in all ranges of electrical work. It gave an understanding of what I should be asking and doing before I even begin to operate a high risk piece of equipment. I personally believe that all electricians should have this training and it...
Layli Wilson, Kiewit Energy Canada Corp.“This is a very beneficial course, probably the best training I've received since starting my apprentice. The instructor is extremely knowledgeable and made the course very interesting. I would strongly recommend using this company for any electrical safety training.”
Brad March, Kiewit Energy Canada Corp“The course was very good, interesting and useful in my work environment. I would recommend it to anyone.”
David Hickle, Prairie Mines & Royalty“Honest presentation regarding the seriousness of the dangers involved. Other HV courses I have been on have been sugar coated in comparison. Excellent real world examples of subject material.”
Dave F, Catalyst Paper“Good awareness of safety, proper clothing and proper equipment/tools to use.”
Mike Zahra, Toronto Transit Commission“Relevant experience applied to classroom presentation makes a valuable experience. Thank you.”
Peter Boman, Centrica Energy"This course was interesting, informative and a great way to learn the safety of working near High Voltage Systems."
Roderick Lavers, Syncrude"Course instructor, Ross Dion is very knowledgeable. I would recommend this course to all electricians."
George Beker, PTI Group“Great instructor gave everybody chance to participate, good pace, and quality of material. Very knowledgeable and experienced at his job.”
Wendell Robicheau, Esso Imperial Oil“The course was technical and explained so that anyone could understand, the course was taught with humor and seriousness which made it eye opening. Very experienced in the knowledge of electricity and made me a better tradesman.”
Lloyd McKinney, Pembina Pipeline“This course is detailed, is excellent for a refresher. I recommend this course to everybody.”
Bruce Rogers, Syncrude Canada“I found the course and especially the instructor to be superb!”
Dave Cousins, Saint Mary's Cement“Was a very good class and opened my eyes to a lot of the hazards that are out there. The instructor answered all of my questions and was well prepared.”
Adam Durdle, Syncrude Canada“The information given is very helpful. Knowing the dangers of the electrical trade, and realizing the precautions necessary to take in order to keep yourself and others safe makes the course very valuable. I'm glad I participated in this training program. Thanks.”
Charly, Catalyst Paper“The course was enlightening. Although I have no background as an electrician, the course and instructor presented the information in a way that not only made it entertaining but helped me understand the dangers of arc flash accidents.”
Clayton Maynard, Halifax International Airport Authority“The instructor was on the ball, very knowledgeable and has a knack for getting the content to the student. I learnt more than I thought I would. Good job!”
Eric Lefebvre, York Energy Centre"Great examples of Arc Flash potential and how to avoid the hazards entirely. It confirms the need for written procedures and processes when working with high voltage."
Chris Heinrich, Brookfield Renewable Energy“All materials and also discussions were put in easy to understand terms which was very helpful to myself, not having an electrical background.”
Brent Mooney, Koch Fertilizer"One of the best training courses ever taken. Well done."
Steven Neggers, PTI Camp Install“I found a number of areas which we could improve safety at our facility. The instructor is knowledgeable, interesting to listen to, and related the material in an easy to understand manner.”
Austin Franklin, CF Industries“This was an excellent course. We will be requiring this course for all our thermographic employees.”
Mike Donovan, Motive 7 Inspections“I really enjoyed this course. I found it very informative and learnt a lot. Ross Dion was great and presented things in a way that was easy to understand. I would highly recommend this course to others.”
Wade Pickrem, Black & McDonald Limited“I found the instructors, Jim Roberts and Ross Dion very knowledgeable and the course relevant to my day to day operations at work.”
Domenic Ferrera, Enbridge Gas Storage“Very informative. I took this course six years ago when I was working in Generation. It was a good refresher and good to see. I am still doing the safety steps that I learned the first time.”
Norman Penner, Catalyst Paper"Ross Dion is a great instructor with great material, very in depth and very knowledgeable."
Tyler Anderson, ABB Ushitau“I really liked this course. It was a good refresher from the last time I took it. I really appreciated all of the personal stories Ross Dion told us.”
Amanda Cardinal, Syncrude CanadaThis course material taught potentially life-saving knowledge for use in everyday work.
Darcy Jollimore, City of Prince George“The instructor has long history of work experience and trade craft. Very knowledgeable in his field of electrical concepts and practices. The course is well laid out with the right amount of information due to the time duration of two days. Would recommend this course for anyone in the electrical...
Rick Warner, National Research Council Canada“Good instruction, kept the course interesting. Shared his life experiences. Good job, speaks well, and a lot of knowledge.”
Bob Currie, Panolam Industries“Good course. Kept my interest. Minimal quizzes but with enough to test. Reinforces me to be diligent with safe work practices.”
Chuck Metzner, Catalyst Paper“The instructor was excellent. Straight to the point and a lot of the material backed with real world experiences. The course covered some holes in my work experiences and I considered it to be quite valuable.”
Jeff Smith, Kruger Products LPThe instructor spoke very well and was knowledgeable in the topics as well as having a lot of real life experience with what was being taught in the course.
Ian Robertson, Enbridge Pipelines“The instructor was very knowledgeable and informative; made the course material understandable, and relayed it to us in a way that kept our attention.”
Peter Hughes, Saint Mary's Cement"Very relevant to my job's work environment. Every electrician should have this training. Learned a lot of new information. Great refresher for the electrical trade."
Patrick Hickey, Kiewit Energy Canada Corp."Very knowledgeable, well around course with a good mix of instruction, video and workshop."
Marc Thibert, Agrium“Lots of good information and practical experience from the instructor.”
Aaron Combs, Slave Lake PulpThe instructor did a good job of providing relevant examples throughout the course.
Jeremy Jamieson, Enbridge Pipelines"This course was informative and lots of examples of both personal and practical experiences. The instructor kept the course flowing so not boring and tiring.”
Harry Bruns, Quesnel PlywoodI found this course engaging and interesting. I feel like I learned a lot and I was surprised the instructor could make the topics interesting. I often find safety courses to be quite boring. This was a refreshing change.
Tyler Montgomery, Canadian Coast Guard“Very knowledgeable, knew his stuff. Very clear in what he was teaching. Really liked his personal stories and how they relate to the course. Appreciated getting taught by a guy who has actually had his hands on the job.”
Terry Loucks, Westmoreland Coal“I thought the instructor was very knowledgeable. The course was very informative, makes me think about some of my methods of doing things!!”
Dave Jones, West Fraser Quesnel Plywood"Course was very well presented. The instructor kept the participants engaged throughout the entire course. I found the material to be useful upon my return to work. I also found that the instructors industry related stories to be very informative and humorous. This was a very good course.
Chris Pederson, Endako Mines“Excellent, very knowledgeable, answered all questions thoroughly and completely, smooth presentation and good hands on demonstration.”
Brent DeRochie, Syncrude“I felt the instructor, Ross Dion was very knowledgeable and got the information across in a very easy to understand way. The course material covered all of the issues that I was concerned about.”
Jeff Taylor, Brookfield Renewable Energy Group“This course is very helpful in our day to day work, especially in a safety aspect in regards to electrical safety and arc flash.”
“Bong” Midrush Constantinopla, Finning Canada“Course content was in excellent, especially with reference to the Z462 with real-life scenarios. The instructor was extremely knowledgeable and was able to give advice and answer pertinent questions.”
Matthew Ferguson, Inter-Pipeline Limited"This course was very informative. We got to go home with a great deal of information and knowledge."
Matt Neil, Syncrude“A great course and very informative. The instructor clearly stated everything and had relevant stories that had a lot to learn from.”
Thomas Hangar, CF Industries“Very knowledgeable instructor. Very good content, it was interesting and fun. This will save my life.”
Michael Downing, Syncrude Canada“Dave Neal did a good job presenting the material covered in this course and did so in a fashion that I found I could retain more of the information.”
Brian Pecor, Daishowa-Marubeni"I found that this Arc Flash High Voltage Safety course very informative. The course brought up a lot of concepts that I was yet to hear of. The instructor was great and presented in a clear manner."
Jake Couture, Syncrude“This was a very informative course to help create more safety knowledge in our workplace. The instructor gave an interesting presentation with post experience while keeping things interactive.”
James Hoffe, Kiewit Energy Canada Corp."The course was very informative and it gave me new knowledge on High Voltage work. Key things I have learnt would be; PPE, approach distances and procedures. The instructor, Ross Dion was very informative and interesting."
Byron Martin, Spectra Energy“Course content moves at a reasonable for attendees to maintain focus. The course content is very relevant to the electrical installed on site.”
Phil Lasek, Shell“As a fresh second year electrical apprentice, this course has been incredibly valuable. I will constantly put the great knowledge I obtained in this course to use. Making me a much safer and more knowledgeable work from this point on.”
Brian Woods, Catalyst PaperThe course contains all the information that a field-level worker should know about electrical hazards and legislation pertaining to those hazards. It highlights the responsibilities of the worker and company owner alike and provides insight into safe work practices and procedures.
Chance Harness, Vollmer Inc.“I enjoyed attending this course. The instructor, Ed Rideout is very informative, easy to follow and has a lot of experience and stories of electrical installations/procedures. I learnt a great deal from this course and would definitely recommend it to my peers/co-workers.
William Grant Watson, Saipem Canada"I thought Dave Neal was very knowledgeable in the electrical field. I certainly feel the benefit of getting a wake-up call to the dangers of electricity. I especially liked the grounding section. I felt it was great to get a refresher on it due to how long its been since we have touched on that."
Chad MacLean, SMS Equipment"This was a good presentation and the interaction with the class went very well. The information was very good and I never realized the amount of power created in those situations, I will be more aware of these hazards."
Merv Robertson, SMS Equipment“The course covered a lot more than just arc flash safety. It also included electrical safety. I would recommend this course to anyone working around electrical components to help identify potential hazards.”
Ryan Goodin, Finning Canada“The course has a lot of good information to rely on to be safe and to do things in a proper sequence to do the job right. It was very informative on all aspects.”
Randy Hricz, University of Saskatchewan“Overall, this was a good course. The practical exercises were a good feature and helped validate the understanding of concepts.”
Todd Hustrulid, Husky Energy“The course was very informative and definitely an eye opener. The instructor was knowledgeable and very helpful.”
Shane Henstridge, Syncrude Canada“The instructor was very knowledgeable, and was able to answer all questions. The instructor allowed discussion and participated in issues that were pertinent to the work that we do. The course brought my knowledge in arc flash and high voltage up to date.”
Nolan Hoddinott, Syncrude CanadaThe instructor taught in a way that was easily understood and the course was very informative.
Jeff Mosdell, Air Liquide“This was the best class I have taken in my career.”
Shaun Jones, Enbridge PipelinesThe course was taught very well despite the fact that it was taught over Zoom due to the current pandemic.
Terence Quinlan, West Fraser LVLThe course was great. The instructor was knowledgeable. The material was informative, and not overly dense. I enjoyed the timing of the course and the breaks we would take.
Robin Sanders, Sutherland-Schultz LtdCourse content was precisely designed and touched most of the basic aspects of ARC Flash & safety related hazards.
Aamir Latif Baloch, Canadian Light Source IncThe course was engaging and the material was relevant. The instructor kept the course moving and interesting.
Fred Raymond, Centerra Gold“The instructor, Dave Neal and the course material were both awesome and very informing. As an apprentice my knowledge base in the E/I field is still being built, but thanks to Dave and this in depth course I have a lot more knowledge on the dangers of arc flash, as well as safety practices when dealing...
Ryan Lund, Daishowa-Marubeni“Critical points of safety on high voltage systems and arc flash issues discussed. Understanding of what arc flash is and what it can do to personal safety is very well-explained. ”
Sindair Piller, Enbridge Pipelines“I enjoyed the class, thx, could very well just saved my life.”
Thomas Marshall, Black & McDonald Limited“This is an excellent training course and very important for all electrical personnel and anyone involved in safety of personnel working in electrical installations.”
Musthafa Kuttuli Parambu, Koch Fertilizer Canada ULC“This was a very informative course that helps you understand how dangerous and destructive Arc Flash can be. You get a great understanding of precautions and safety needed to keep yourself and co-workers safe.”
Chad Savage, Syncrude Canada Ltd.Day 1 | |
---|---|
Start time, Introductions | 08:00 - 10:00 am |
Morning Break | 10:00 - 10:15 am |
Class Time | 10:15 - 12:00 pm |
Lunch | 12:00 - 01:00 pm |
Class Time, Afternoon Break | 01:00 - 03:00 pm |
Class Time/End Time | 03:15 - 04:30 pm |
Day 2 | |
---|---|
Start time, Introductions | 08:00 - 10:00 am |
Morning Break | 10:00 - 10:15 am |
Class Time | 10:15 - 12:00 pm |
Lunch | 12:00 - 01:00 pm |
Class Time, Afternoon Break | 01:00 - 03:00 pm |
Class Time/End Time | 03:15 - 04:30 pm |